Edelbrock Automobile Parts 8824 User Manual

VICTOR SERIES ALUMINUM WATER PUMP  
For 1958-1979 361-440 (Incl. 426 Hemi) and 1969-1985 318-360 Chrysler V8s  
Part #8814, 8824, 8877 & 8887  
®
INSTALLATION INSTRUCTIONS  
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common  
tools and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable  
performing this installation, it is recommended to have the installation completed by a qualified mechanic. If you have any questions,  
please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday.  
IMPORTANT NOTE: Proper installation is the responsibility of the installer. Improper installation may result in poor  
performance and engine or vehicle damage.  
DESCRIPTION: The Victor series are heavy duty water pumps for both street and racing applications. These pumps are a direct  
replacement for the original equipment pump to provide compatibility with all accessories and pulleys. It offers weight savings along  
with increased durability and cooling potential. It is a standard rotation water pump for Chrysler Wedge (B & RB), 426 Hemi and Small  
Block engines and should not be used on engines converted to a serpentine belt pulley system.  
INSTALLATION: Installation is the same as for orignal equipment water pumps. Consult service manual for specific procedures.  
CAUTION: Be sure that the fan bolts don’t protrude through the hub so far that they hit the water pump housing. Check closely  
for any interference with drive belts; some filing for clearance may be necessary with some applications. Verify that the radiator  
fan is properly balanced. Imbalanced fans can cause severe damage and/or injury and will void your warranty.  
WARNING  
Incorrect alignment or an unbalanced condition puts excessive strain on the pump's shaft and/or bearing and will result  
in early failure of the shaft and/or bearing. The balance of the assembly depends primarily upon the concentricity of  
the fan clutch with the pump shaft. Concentricity is not assured when universal type clutches are used. The universal  
fan clutch has a 3/4" pilot hole, so an adapter must be used when installing a water pump with a 5/8" shaft. This  
adapter bushing is supplied with the unit. These adapter bushings add to the machine tolerances of the assembly, so  
special care must be taken to maintain concentricity with the shaft and the clutch fan.  
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503  
Tech Line: 800-416-8628  
Part #8814, #8824, #8877 & #8887  
Rev. 5/09- AJ/mc  
©2009 Edelbrock Corporation  
Brochure #63-8814  
 

Extron electronic Stereo System DMP 44 LC User Manual
Fender Speaker System P N 051923 User Manual
FilterStream Vacuum Cleaner D4200 User Manual
Fisher Price Motorized Toy Car 76960 User Manual
Franke Consumer Products Ventilation Hood FNE 368 TC W User Manual
Frigidaire Cooktop 318046807 1 User Manual
Frymaster Fryer 824E User Manual
GE Monogram Satellite Radio ZBD3500ZWW User Manual
GE Water Dispenser GXSF27E User Manual
Gianni Industries Door TB 400 User Manual