TURBOCHARGER TURBINE INLET STUD KIT
For Exhaust Manifold To Turbine Inlet
Catalog # 15012
INSTALLATION INSTRUCTIONS
Description: Contains the necessary hardware to mount the turbine inlet to the exhaust manifold. The hardware is constructed of
high-quality stainless steel and can be used with any Garrett T25 or T28 Turbocharger.
•
Kit Contents:
Qty.
Description
1.45”
K 4 Stud, 8mm x 1.25 x 1.45” long
K 4 Nut, 8mm x 1.25
K 4 Washer, 8mm
•
INSTALLATION:
Towards Exhaust
Manifold
Towards Turbine
Inlet
1. Hand tighten the 1.45” long studs into the exhaust
manifold, with the shorter threads towards the manifold
(See Fig. 1).
Fig. 1
2. When attaching the turbocharger to the exhaust manifold,
and the turbo outlet elbow to the turbocharger, use an 8mm
washer under each nut, and hand tighten the 8mm x 1.25
nuts onto the studs.
Edelbrock Corporation
2700 California St. • Torrance • CA • 90503
Tech Line: 1-800-416-8628
3. Torque the 8mm x 1.25 nuts to 190 inch/lbs. (approximately
16 ft/lbs).
E-Mail: Edelbrock@Edelbrock.com
Catalog #15012
Rev. 5/05 - RS/mc
©2005 Edelbrock Corporation
Brochure #63-0391
TURBOCHARGER TURBINE INLET STUD KIT
For Exhaust Manifold To Turbine Inlet
Catalog # 15012
INSTALLATION INSTRUCTIONS
Description: Contains the necessary hardware to mount the turbine inlet to the exhaust manifold. The hardware is constructed of
high-quality stainless steel and can be used with any Garrett T25 or T28 Turbocharger.
•
Kit Contents:
Qty.
Description
1.45”
K 4 Stud, 8mm x 1.25 x 1.45” long
K 4 Nut, 8mm x 1.25
K 4 Washer, 8mm
•
INSTALLATION:
Towards Exhaust
Manifold
Towards Turbine
Inlet
1. Hand tighten the 1.45” long studs into the exhaust
manifold, with the shorter threads towards the manifold
(See Fig. 1).
Fig. 1
2. When attaching the turbocharger to the exhaust manifold,
and the turbo outlet elbow to the turbocharger, use an 8mm
washer under each nut, and hand tighten the 8mm x 1.25
nuts onto the studs.
Edelbrock Corporation
2700 California St. • Torrance • CA • 90503
Tech Line: 1-800-416-8628
3. Torque the 8mm x 1.25 nuts to 190 inch/lbs. (approximately
16 ft/lbs).
E-Mail: Edelbrock@Edelbrock.com
Catalog #15012
Rev. 5/05 - RS/mc
©2005 Edelbrock Corporation
Brochure #63-0391
|