Coleman Tent 2000001585 User Manual

®
ELITE SUNDOME 6 TENT  
MODEL 2000001585  
7. Stretch corners and sides of tent until floor is taut then hammer  
Before you begin  
stakes through loops to secure. (Fig. 3B)  
Read all instructions before set up.  
• Select a level site clear of rocks, branches, and other hard or sharp  
objects, to install your tent.  
Fig. 3  
WARNING: Keep clear of overhead power lines.  
• Do not set up your tent under trees because of potential lightning strikes  
or falling tree limbs in inclement weather.  
• Secure with all stakes and guylines provided to prevent property damage  
or personal injury.  
• For best results in windy conditions, position narrow end of tent into  
the wind.  
• Enlist the help of at least one other person to assist you when it is time  
to assemble the tent.  
Pole Descriptions  
Door  
Pole  
Pole  
Pole  
Description  
Qty. Dia.  
Repair Kit Replacement Kit  
Main Poles, long, black  
2
11mm 5010000539 5010000549  
Rainfly Pole, black  
w/metal tips  
1
1
1
11mm 5010000539 5010000549  
Vertical Door Pole, black,  
short w/rubber tips  
6.3mm 501000543  
6.3mm 501000543  
501000545  
501000545  
Door Pole, black,  
long w/rubber tips  
3A  
3B  
Self-Rolling Window Spring Descriptions  
Color Code Description  
Qty.  
Length Replacement Part No.  
Green  
Orange  
1
1
550mm  
670mm  
5010000626  
5010000628  
Hinged, Rigid Door  
1. Assemble Vertical Door Pole (shorter black pole with plastic tips);  
then insert through zippered vertical pole sleeve on hinged side of  
door. (Fig. 4)  
CAUTION: “Springs” may have sharp edges. Handle with care to avoid  
injury. Keep out of reach of children.  
2. Insert end of Vertical Door Pole into bottom hinge plate, apply  
pressure to form a slight bow, then insert other tip of pole into top  
hinge. Zip up vertical pole sleeve. (Fig. 5 & 6)  
3. Assemble Door Pole (longer black pole with plastic cap tips); then  
insert into zippered pole sleeve at top of door. (Fig. 7)  
4. Insert end of Door Pole into top hinge plate, apply pressure to form  
a bow, then insert other tip of pole into the bottom hinge. (Fig. 8)  
5. Zip up pole sleeve to enclose Door Pole. (Fig. 9)  
To Set Up Tent  
1. Unfold tent and spread out on a clean, level surface with the door  
facing the desired direction. (Fig. 1)  
2. Assemble two main tent poles by interlocking the longer, black  
shock-corded, poles.  
3. Insert both, long, black poles through sleeves in top of tent as  
shown. (Fig. 1)  
Fig. 4  
Fig. 5  
Fig. 6  
Vertical Pole  
Sleeve  
Fig. 1  
Door Hinge  
Long, Black,  
Shock-corded  
Main Poles  
Fig. 8  
Fig. 7  
Door  
Top  
Door  
Hinge  
Pole  
Sleeve  
Fig. 9  
Front of Tent  
To Attach Rainfly  
1. Assemble longer interlocking shock-corded rainfly pole.  
2. Unfold rainfly. Locate the sleeve, along front edge, and the hook &  
loop fasteners on the underside of Rainfly.  
3. Drape Rainfly over tent. Make sure the sleeve is centered over the  
door and the hook & loop fasteners, on the seams on underside of  
the Rainfly, are  
4. Insert one end of each black  
pole into pins in front corners of  
tent. (Fig. 2)  
Rainfly  
Pole  
positioned over  
the black main  
poles.  
Rainfly  
Sleeve  
4. Slide rainfly pole  
through sleeve at  
front of the Rainfly.  
(Fig. 10)  
Fig. 2  
Door  
5. Go to opposite end of each pole and gradually apply pressure to the  
pole forming an arch. Insert the pin into the pole end at the corners  
of tent. (Fig. 3)  
6. Attach frame clips along edges of tent to black main poles.  
(Fig. 3A)  
(continued on  
other side)  
Fig. 10  
 

COBY electronic Tablet MID7042 User Manual
Craig Flat Panel Television CLC503 User Manual
Cuisinart Blender 09CE13231 User Manual
Cypress Computer Hardware CY7C6431x User Manual
Dimplex Electric Heater DNB20 User Manual
DVS Blower 99000153 User Manual
EverFocus Flat Panel Television EN 7542H User Manual
Fender Musical Toy Instrument PM 1 Deluxe User Manual
Fisher Price Crib Toy P5334 User Manual
Gigabyte Network Router GN BR01G User Manual